Projects
Here are just a few of our project installations for a wide range of air pollution control applications. We hope you find this list helpful in reaching your own pollution solution.
School Woodworking Room
A VibraClean model VC24VW at a school woodworking room.
Plasma Fumes
APC Side Removal Cartridge Series Dust Collector model SRC4-2 installed to extract plasma fumes.
Galvanising Kettle Fumes
A complete turn-key solution for galvanising fume extraction included a PulseAir model PA260 with extraction stack.
Laboratory Scrubbers
Multiple high efficiency Acid Fume Scrubbers installed at a mine site analytical laboratory.
Fire Assay Furnace Hoods
Suspended hoods for extraction of lead oxide fumes from Cupel furnaces.
Splitter Benches
Workbenches with fitted extraction hoods, for everything from Riffle splitters through general product handling to welding fumes.
Mine Site: SRC 4-2 Dust Collector Installation
Side Removal Cartridge Collector model SRC4-2 at a mine site. This unit is fitted to a sample prep laboratory and is fitted with a full acoustic enclosure for the fan – a stunningly low 63dB(A) noise level.
Cement Dust
Air slides installed to transfer cement dust.
Mine Site: Fire Assay Fume
An APC Side Removal Cartridge Series Collector, model SRC8-2, installed on a mine site for removal of fire assay fumes containing Litharge (lead) and co-mingled with pulverised rock dust.
Central Vacuum System
The Central Vacuum System installed at a gold and copper ore processing concentrator plant.
Cement Dust
An APC Side Removal Pleated Bag Series Dust Collector model SRPB36 was installed to extract cement dust at a major cement works.
Belt Conveying
Belt Conveyors were supplied and installed to convey crushed rock dust from a number of machines to an external collection point.
High Speed Laboratory Drying Oven
Specialised stainless lined high temperature drying ovens installed for sample drying. Large ovens, each have eighteen trolley capacity and high speed turn around.
School Woodworking
APC VibraClean model VC30V dust extractor installed to extract woodwork fines.
Laboratory Sample Prep Collector
PulseAir model PA43 in transit to a laboratory for screening of agricultural dust samples.
Woodworking and Kiln Drying
High Efficiency Cyclone model CY750 was installed to extract saw dust fines.
High temperature air was transferred via APC ‘therma-lag’ ducting.
Fine Sand Dust Extraction
An APC PulseAir model PA224 was installed to extract fine sand dust generated in material transfer.
High temperature air was also extracted from process dryers through an APC Cyclone.
Mine Site: Screening Circuit And Conveyor Venting
A major cartridge collector supplied for a screening circuit.
Various insertable collectors were also supplied for conveyor interchange venting.
Odour Dispersion
20mtr high stacks were installed above a building roofline to disperse odours.
Various Duct Installations
Capped Exhaust Stacks from Muffle Furnaces.
Sample preparation laboratory – with both a central vacuum system and also general dust extraction.
Fire Assay system ducting.